Technical Information

Standard Conception

Sections: 63 mm module squarecut assembled by screws and screw sockets (stainless steel screws).
Weatherproofing: by EPDM or polyethylen brush gaskets on upright sections and each horizontal transom. Water drainage via bottom transom.
Fastening: to the building structure by clip-in capping section.
Outside sill/architrave: directly by clipping into the grooves in the fixed frame.
Integration: juxtaposition of frames, realization of ribbon /stacked frames, composition with casement or slider frame from Topaze series, removable fly screen, glazed storm sash.

Sections: curved aluminium or glass louvres fitted with nylon end caps, open to 80°, interval of 135 mm.
Weatherproofing : by EPDM gasket on each louvre.
Infill system: by 5 to 6.6 mm U-shaped EPDM gasket for glass louvres, laminated 33/2 recommended on basement.
Options: combination of glass and aluminium louvres. Possibility of intermediate transom on glass louvre version only.

Louvre opening system by rods fitted with pins that directly operate the louvre end caps.
Operated by lever handles or knobs for symmetric and simultaneous opening of louvres to 80°.
Spring-loaded compensator for easy operation of louvres according to dimensions.

Installation of fixed frame either:
- on bottom transom only,
- on single inside sill section,
- on inside sill section with trim.
Accommodates fly screen on front of frame.
Accommodates operable glazed storm window.

Select a Window Type